News

1st Feb 2012

Uchi Embedded Systems is representing Cleverscope at the EFY Expo in Pragati Maidan , New Delhi, INDIA. Meet them at Booth no: B71, February 16-18.

1st Dec 2011

We welcome three new distributors to our network. Partner Electronics in Turkey, Elektro Control Industries in Pakistan and Uchi Embedded Systems in India. Clients in those coutnries now have a local company to talk to. Welcome aboard!

6th Nov 2011

Finally we are launching our new website!

5 Mar 2011

Well we finally solved the problem of a signed driver for the CS328. Thanks for your help FTDI ! So now if you use Update 4651, and run setup, choose the Install Classic Cleverscope CS328 Driver, you will be able to use your CS328 under Windows 7 x64. The existing CS328A carries on as before - working for both x32 and x64. (See the downloads page). Thanks for your patience.

15th Feb 2010

We are pleased to announce we have appointed a distributor in India. SALICON NANO TECHNOLOGY PVT LTD has had many years of experience in assisting businesses and universities source electronic test equipment. Contact details can be found on our Distributors page

23rd Nov 2009

We have recently appointed a distributor for Belgium and the Netherlands. Antratek have offices in both countries and are an experienced distributor of modules, tools and kits for professional electronics and robotics. Contact details are available on our Distributors page.

12 Nov 2009

We have updated the Cleverscope Control Driver V2.1 DLL, and also all the Labview Control Drivers from 7.1 - 8.6. The driver now supports up to 32 connected Cleverscope Acquisition Units, both the old and new versions of the Calibration tables, connection of the classic CS328 vi our own Cleverscope VID/PID (1E41/0010), and the new Function call to return CAU serial number, firmware version, frame size, temperature, and driver version. Includes support for the moving average filter methods. We include an updated DLL description, and also the Labview application description which has applicable step by step instructions on call sequence and passed values. Works best with 6439+

20 April 2009

We have updated the Cleverscope Control Driver V2, with a new example built in MS Visual Basic 2005. See the Resources page. Two new worked examples have been added to the examples page: 1) protocol analysys and dual trigger triggering , and 2) Using Filtering to improve SNR and extract low level signals. Both include a .pdf, and full buffer signals for you to look at. You will need version 4637+

7 April 2009

We have added a guided tour to protocol decoding, with a worked example, and an example signal for you to load. See our resources page.

25 Feb 2009

We have a new version of the Cleverscope Manual, version 2.6, which covers the Protocol decoder, Signal Information logging, Maths, Ethernet and quite a bit more. See it on our resources page!