CS328A-XSE
Cleverscope Model CS320A is a USB connected, PC hosted oscilloscope and spectrum analyser with PC based application software.
Here is our latest data sheet, available for you to download.
You will also find our demonstration software here as well as other useful resources
CS328A-XSE Acquisition Unit
- Two 14 bit analog channels sampling simultaneously at 100 MSa/sec. AC or DC coupled.
- 10/100Mbit ethernet interface
- CS700A Signal Generator (0-10MHz, Sine, Square, Triangle)
- Gain automatically set from 20mV full scale to 800V full scale by choosing graph view and probe switch setting.
- Offset automatically set to correspond to the selected amplitude axis view. As an example a graph with amplitude axis of 2.40 to 2.42V automatically chooses a 20mV range offset by +2.40V - good for looking at small signals in single supply op-amp applications.
- Analog triggering of the waveform in view with a resolution of 1% of the display height. The analog trigger may optionally be conditioned with a low pass, high pass or noise filter.
- One external trigger, threshold adjustable from 0 to ±18V in 40 mV increments.
- Eight digital inputs sampling at 100 MSa/sec, threshold adjustable from 0 to 10 V in 10 mV increments.
- A dual hardware trigger system based on a rising or falling edge on any input signal, optionally qualified by a user defined digital input combination, triggering when one or both trigger conditions are met, and the time between triggers is less than, in or more than a user defined range, or the trigger count equals a user defined value.
- A rear panel I/O connector with a 100 Mbit/sec bi-directional LVDS/RS422 link, and three RS422 outputs defaulting to sampling started, trigger received and sampling stopped.
- Each channel (two analog, ext trigger and eight digital) includes 4 or 8M samples of storage, providing up to 40 ms of simultaneous storage for each channel, with 10 ns resolution.
- The sample storage may be allocated as between 2 to 3000 frames varying in size from 4M to 2000 samples. These may be used as a history store for reviewing previously captured signals, or to capture up to 3000 trigger events with a minimal inter-frame delay, while maintaining time relative to the first trigger for all succeeding frames.
- 20 MHz 5th order Anti-alias filter for improved Spectrum Analysis performance.
- Triggered LED and Power LED on the front panel.
- Input power range from 6 ~ 12V, 6W provided by a universal mains adaptor.
- Low jitter (1 ps rms) sampling clock for 70 dB spurious free dynamic range.
- Self calibration to ensure DC performance specifications are met.
- Enclosure size: 153 x 195 x 35 mm.
CS300 Application Software
- Separate, freely moveable and resizable windows to display the signal, a zoomed signal view, and the frequency spectrum of the signal, and control panel.
- The zoomed signal view optionally tracks the signal view cursor.
- Spectrum analysis with a variety of conditioning windows and display in log or linear format.
- Each signal window includes a time/amplitude tracer, and two markers for comparison purposes. Colours are user definable.
- Signal averaging (exponential, block and peak hold) and low pass filtering.
- Signal measurement, including Peak to Peak, RMS, DC, pulse width, period and frequency.
- Copy and Paste graphic or data to other applications.
- Save and Open from disk.
- User defined units, signal names and scaling (offset and gain).
- Text annotation of each graph.
CS328A-XSE Equipment List
The following equipment is included with the CS320A:
- 1 x CS320A Oscilloscope Acquisition Unit
- 1 x Power Supply Unit and lead
- 2 x CS1001 1x/10x 150MHz probe kit
- 1 x CS1004/CS1005 8 bit 100MHz digital input pods including probes
- 1 x ethernet cable
- 1 x CD that includes CS300 Application Software, CS328A User Manual, sample files, videos and white papers
Here is our latest data sheet, available for you to download.
